The National Safety Education Center features an instructional staff comprised of experienced and knowledgeable safety professionals who possess excellent credentials relevant to a variety of safety areas.
Esmail is an Arabic instructor and translator, and a Certified Safety Professional (CSP). He is also an OSHA authorized trainer for OSHA 10 and OSHA 30-hour courses. As a safety engineer, he brings a wealth of experience from his work in Mega Construction Projects overseas.
Dino is a bilingual Safety and Training Professional with over 40 years of experience in all aspects of the Oil Refining Industry and the Fire service. He has authored and taught numerous Task and Job Specific Safety Training courses including LOTO, CSE, Scaffolding, Cranes and Rigging hot work, PPE, and Respiratory Programs.
His extensive background includes OSHA PSM compliance training, compliance audits, accident investigation, contractor safety, behavior based safety, and site-specific training programs.
During his career, Dino served on numerous corporate initiatives in Health, Safety, Security and Environmental and was also the Safety Manager for the CITGO Savannah, Georgia Refinery, which included serving on the Chatham County Local Emergency Planning Committee. Dino held positions in the incident management of hurricane recovery, oil spill mitigation, and numerous process unit fires. Dino is a past member of ASSE Three Rivers Chapter, with educational background in Fire Safety, Facility Security, Emergency Response, NIMS, and Environmental Control Technology. Dino served 6 years in the US Army and 20 years as a Nationally Registered Paramedic and firefighter Read full bio.
Don Bartalone has been involved in the transportation and warehousing industries for over 35 years and served on the safety team and committee for 20 of those years. Don spent five years as a facility manager / safety coordinator for an oil refinery. He is an OSHA-authorized General Industry and Construction Outreach Trainer who conducts 10- and 30-hour hazard recognition safety training. Don is the lead instructor at the National Safety Education Center as well as he instructs the National Safety Council certificates in Fork Lift Truck Operator Training, Incident Investigation, Safety Inspections and Advanced Safety. More recently, Don has broadened his teaching horizons to the international level – traveling to Saudi Arabia to assist in a safety development program for the world’s largest oil company. Read full bio.
Brent Bryden brings 32 years of manufacturing safety and environmental health experience. He is able to facilitate training for small, medium and large employers with a wide range of needs. His passion is to educate the basics to form strong safety foundations within an organization through training and education. Brent strives to effectively manage the elements of those safety programs for its employees and the companies they represent. Continuous improvement in safety training is his vision and maintaining a level of service to providing quality products, practices and services driven to achieve positive results is his goal Read full bio.
Kent Crytzer serves as Director of Safety and leads the Construction Employers Association's safety programming, as well as the Construction Safety Council of Northeast Ohio. He is one of 12,000 professionals to actively hold the CSP designation in the United States. Prior to CEA, Kent worked at The Ruhlin Company, where he was a safety specialist. Kent graduated with a degree in safety and environmental management from Slippery Rock University in 2002 and obtained his Certified Safety Professional designation in April of 2009 Read full bio.
Sheri DeBose is a safety and training professional with more than 30 years experience in the manufacturing and utility industries. She is an OSHA General Industry outreach trainer experienced in conducting 10-hour, 30-hour and annual OSHA training requirements. Sheri also instructs OSHA 511, 501 and 503 classes for the National Safety Education Center. She holds a Master's Degree in business administration from the University of Illinois. She is an independent consultant with hands-on experience conducting site audits, forklift training, ergonomic assessments, accident analysis and observation based training. Sheri is also an adjunct professor at Richland Community College in Decatur, Illinois, teaching occupational safety and health. Read full bio.
John holds a Master’s of Science degree in Industrial Hygiene. He has an extensive background in the comprehensive practice of industrial hygiene for the past thirty years and is certified by the American Board of Industrial Hygiene. He is a sole proprietor consultant focusing on the construction industry. John also has several years of experience as a trainer in Continuing Education courses for lead, asbestos, and industrial hygiene at the University of Cincinnati and the University of Illinois at Chicago and in silica, lead, asbestos, confined space, industrial hygiene and OSHA Ed Center Courses for the National Safety Education Center (at Northern Illinois University and at the Construction Safety Council) Read full bio.
Pete has been involved in the building construction industry since 1975; and has worked as a carpenter, millwright, piledriver and cabinetmaker. He currently teaches the Carpentry Occupations Program at Kaskaskia College, where is also responsible for much of the safety training provided by the college. He has been an OSHA Outreach trainer since 2004, and has taught RRP (Renovate, Repair, and Paint) EPA lead training, both initial and refresher courses as well as forklift and MEWP training certification. In 2017, he completed training for a Specialist in Safety and Health from St. Louis University Read full bio.
Mark England is a Safety and Health Specialist with Nicolet College in Rhinelander, WI with 30 years of experience in manufacturing and education related to safety, health, and emergency response. Mark is an Authorized OSHA General Industry and Construction Outreach Trainer experienced in conducting 10-hour, 30-hour courses and annual OSHA training requirements throughout the state of Wisconsin. Mark also instructs OSHA classes through Nicolet College as a host site for the National Safety Education Center. His instructor credentials include the State of Wisconsin Technical College School System- Instructor of Industrial Safety and Industrial Equipment Mechanic, OSHA Training Institute Education Centers, Hazardous Materials Training and Research Institute (HMTRI), and The Community and College Consortium for Health and Safety Training (CCCHST) Read full bio.
Latino Worker Safety Center (LWSC) Assistant Director Minnesota, Bilingual Safety Professional, AHA, Asbestos/Lead Abatement, OSHA 500, 501 Outreach Trainer and over 27 years safety experience.
Jason is the Associate Dean of Public Safety at Nicolet College in Rhinelander, Wisconsin. He has been involved in emergency response for business and industry and public safety organizations since 1990. Jason has held positions including; Firefighter, Fire Chief, Hazmat Technician, Hazmat Chief, Emergency Medical Technician, and Deputy Emergency Government Director. He has been an educator since 1996 specializing technical rescue, hazardous materials, occupational health and safety, and is an OSHA General Industry Outreach Trainer Read full bio.
Latino Worker Safety Center (LWSC) Polish Language Instructor and Translator, OSHA 500 Outreach Trainer with 29 years of Residential and Commercial Construction experience.
Howard Honig brings a wealth of knowledge in Occupational Safety and Hazardous Materials. Howard was an Operating Engineer with the City of Chicago for over 30 years. Howard has provided training to many industries including; manufacturing, healthcare, service sectors as well as Construction and Heavy Equipment Operator safety classes. Howard is a lead instructor for the Fundamentals of Industrial Safety program covering OSHA Compliance, Audits & Inspections, Accident-Incident Reporting, Workers Compensation, Ergonomics and Safety Management. He has conducted numerous training sessions for small and large organizations in Hazardous Waste Operations, and Emergency Response Standards (HAZWOPER), Fork Lift Training, Confined Space Training, OSHA requirements and Hazmat. Howard has been an Authorized Outreach Instructor for many years conducting 10 and 30 hour General Industry and Construction safety trainings Read full bio.
Mark Kohnen is an Associate Professor Faculty member for Kaskaskia College. Mark is a Specialist in Safety and Health, an OSHA 10 and 30 hour trainer, a fork truck and aerial platform lift trainer, and an OSHA 500 Outreach Trainer. Markís teaching profession is a Certified Master HVAC Educator (CMHE). He spent nearly 27 years in the field of HVAC. Kaskaskia College HVAC Program is a Nationally Accredited Program through HVAC Excellence with a strong demand on safety awareness. Markís strong history of field work safety brings real life situations to the classroom Read full bio.
Terry Larson, GSP, obtained his bachelor’s degree in Occupational Safety from Waldorf University. Prior to coming to the Minnesota Safety Council, Terry worked in the general industry field as well as the Minnesota Army National Guard. In these roles he helped to reduce the risk of injury and illness for workers. Terry’s passion lies in collaborating across boundaries to find common ground in delivering safety education and training programs to create the safest possible work area Read full bio.
Matt has experience in the creation and implementation of company policies and procedures that meet government regulations and codes to include initial creation, updating, re-evaluating, pre-visit planning, post-visit-action planning, and follow up. Matt offers a background in the areas of Chemical/Hazardous Material as well as Department of Transportation regulations for drivers and vehicles Read full bio.
Latino Worker Safety Center (LWSC) Spanish Language Safety Professional and Translator, AHA, OSHA 500 Outreach Trainer, Journalist, LWSC Founding Member specializing in Spanish Fall Prevention Training.
John Newquist is an independent safety trainer, author and consultant. From 2005-12, John was Region V’s Assistant Regional Administrator for Cooperative and State Programs, where he managed the region’s training programs, Susan Harwood Grants, state plans and consultation grants, and voluntary protection programs. He has a BS in fire protection and safety engineering from the Illinois Institute of Technology and a Master's of Science in industrial management from Northern Illinois University. A Certified Safety Professional, he was a founding member of the ANSI Z359 Standards Committee (Safety Requirements for Fall Arrest Systems). He created and taught the first OSHA Training Institute fall arrest and process safety management classes. He has taught hundreds of safety seminars across the country, including the National VPPPA, Construction Safety Conference, American Society of Safety Engineers and National Fire Protection Association. He worked for OSHA from 1983-2012, including a stint as the Area Director of the Peoria Area Office Read full bio.
Latino Worker Safety Center (LWSC) Executive Director, Bilingual Safety Professional, Translator, CHST, AHA, ATSSA, IPAF, OSHA 500, 501 Outreach Trainer with a degree in Construction Management and over
Latino Worker Safety Center (LWSC), OSHA’s Public Sector Safety & Health Fundamentals Certificate Holder for Construction and General Industry, Spanish Language Safety Professional and Translator, AHA, OSHA 500, 501 Outreach Trainer, Author, with over 20 years’ experience in Construction and General Industry.
Paul Satti is the technical director of projects and research at the Construction Safety Council with over 20 years of experience applying safety and health management systems. Paul holds a Master's degree in industrial management from Northern Illinois University, is a Certified Safety Professional and Construction Health and Safety Technologist by the Board of Certified Safety Professionals and an authorized OSHA outreach trainer for construction. Paul has authored a number of student and technical manuals in construction safety and brings a wide scope of knowledge to the class Read full bio.
Barry Schwalbe has over 20 years of experience in environmental chemistry and safety. He is a Certified Hazardous Materials Manager (CHMM) through the Institute of Hazardous Materials Management. Barry is a training coordinator at Richland Community College in Decatur, Illinois. Barry is an OSHA authorized trainer for both General Industry and Construction and a Training Center Coordinator for the American Heart Association. He has a bachelor’s degree in chemistry from Eastern Illinois University and an MBA from the University of Illinois at Springfield. In addition to training center coordination, Barry teaches OSHA 10-hour and 30-hour classes, emergency response, hazardous materials, and first aid/CPR Read full bio.
Rich has over 16 years of occupational safety and fire/emergency service experience. He spent nearly four years as the safety director at Global Finishing Solutions in Osseo, where he worked extensively within both the general (29 CFR 1910) and construction industry (29 CFR 1926) regulations. He worked within the Army Corps of Engineering EM-385 regulations on various U.S. Defense sites, and managed fleet safety and diver qualification as applicable to the Department of Transportation Regulations (49 CFR). He also coordinated all environmental activities as applicable to the Wisconsin DNR and EPA Regulations Read full bio.
Bryan Steiber holds a Specialist in Safety and Health certificate from both the Midwest OSHA Education Center, and the OSHA Education Center at the University of Texas at Arlington. His decades of work on the cellular communication towers of this country have honed his skills in fall protection, rigging, and radio frequency exposure. Bryan is an alumni of the Construction Safety Council’s 145-Hour Construction Safety Administrator’s Certificate course, which provided him with the knowledge to pass the Construction Health and Safety Technician’s examination delivered by the Board of Certified Safety Professionals. Bryan is an authorized instructor for the construction industry and for general industry hazard awareness courses. Bryan also holds an instructor status with the American Heart Association for Basic Life Support and First Aid/CPR/AED. Bryan is currently working on a degree in occupational safety and health with San Juan College Read full bio.
Larry Te Stroete has been an OSHA Authorized Outreach Trainer and safety instructor for over 28 years. Among his areas of expertise are construction/general industry safety, forklift training, hazardous materials handling, environmental health and safety and emergency management. His instructor credentials include the Wisconsin Technical School System, OSHA Training Institute Education Centers and the National Association of Safety Professionals. Larry is an enthusiastic instructor with knowledge and experience to share with his students. He brings OSHA safety standards to life by sharing exciting, current real-life examples Read full bio.
William R Stuart, MPH, CSP obtained his Master Degree in Public Health from the University of Minnesota. Bill has over 28 years of experience in the Environmental, Health and Safety field, making his move to the Minnesota Safety Council a natural fit. Bill's great passion is relationship building and bringing the concepts of safety and safety management to a level that is easy to grasp and understandable for everybody Read full bio.
Latino Worker Safety Center (LWSC) Assistant Director Wisconsin, Spanish Safety Professional, AHA, ATSSA, Forklift, OSHA 500 Outreach Trainer with over 14 Years of Health and Safety experience.
Wes VanHuss is an independent safety trainer with over 15 years of experience in construction and construction safety. When not teaching, Wes manages production of flammability testing instrumentation and travels the world providing installation, service and training. His wide variety of experience brings many real-world scenarios to the classroom. Wes specializes in electrical safety and NFPA 70E. As a safety manager, Wes provided NFPA 70E training to over 1,500 field employees. Wes is a licensed journeyman electrician in the state of Wisconsin and is an authorized OSHA 10- and 30- hour instructor in Construction and General Industry. His high energy, interactive style and classroom demonstrations make learning an enjoyable experience for all Read full bio.
Waydick has been a fire service instructor at Nicolet College in Rhinelander, WI for over 18 years specializing in Confined Space, Trench Rescue, and Hazardous Materials Response Training. He has been an OSHA Trainer for 15 years covering General Industry and Construction Industry. He is the Assistant Fire Chief of the Rhinelander Fire Department and the Assistant Chief of the Oneida County Hazmat Team. He has been active in public safety for over 26 years. Tom specializes in the construction industry as the local building inspector credentialed in residential construction, HVAC, Electrical and Plumbing, and commercial construction and HVAC Read full bio.
For questions regarding payment for courses, call 800-656-5317
For questions on submitting 10-hour and 30-hour card requests or replacement cards, call 815-753-6904